Microbe-Lift Oxy Pond Cleaner 8 lbs (MPN OPCMD)

Microbe-Lift Oxy Pond Cleaner is a highly effective solution that is designed to break down and remove unsightly debris in ponds. From rocks and waterfalls to streams and planters, this cleaner can safely and efficiently eliminate accumulated debris. By using the power of oxygen, it oxidizes and detoxifies the area, leaving it clean and free from unpleasant odors. When used as directed, Microbe-Lift Oxy Pond Cleaner is completely safe for use. For optimal results, it is recommended to manually remove as much debris as possible before applying the cleaner. In areas with a significant build-up of debris, simply sprinkle the cleaner over the targeted areas, ensuring direct contact with the debris while avoiding live plants whenever feasible. To maintain a well-balanced ecosystem, it is advisable to add a bacterial or enzymatic treatment, such as Microbe-Lift PL, 48 hours after using Microbe-Lift Oxy Pond Cleaner. Before utilizing Microbe-Lift Oxy Pond Cleaner, it is crucial to test the ammonia levels in the pond water. If the levels are above 0.8mg/L, it is best to refrain from applying the cleaner until the ammonia level is reduced below 0.8mg/L. In cases where ammonia levels exceed 1.0mg/L, it is recommended to incorporate Microbe-Lift Ammonia Remover. Additionally, it is important to monitor the ammonia levels for two days after using any oxygen release compounds, as they can potentially harm the beneficial bacteria in the pond. If the ammonia levels surpass 1.0mg/L, Microbe-Lift Ammonia Remover can be utilized to lower the ammonia level to 0.8mg/L or below. The application rates of Microbe-Lift Oxy Pond Cleaner vary depending on the size of the pond and the level of debris accumulation. For ponds ranging from 80 to 200 gallons, it is advisable to use 0.75 oz. for weekly maintenance with no existing debris. For ponds with light debris accumulation, 1 oz. is recommended, while 1.5 oz. is advised for ponds with heavy debris accumulation. The dosage increases proportionally for larger ponds and lakes. For effective pond cleaning on non-painted surfaces, the recommended usage is 96 oz. per 1,000 sq. ft. of surface area.